Jiangsu Peony Centrifuge Manufacturing Co., Ltd.
Main products:Centrifuge
Products
Contact Us
  • Contact Person : Mr. Gu Jim
  • Company Name : Jiangsu Peony Centrifuge Manufacturing Co., Ltd.
  • Tel : 86-512-58608620
  • Fax : 86-512-58960118
  • Address : Jiangsu,Zhangjiagang,Leyu Town, Zhangjiagang City, Jiangsu Province. China
  • Country/Region : China
  • Zip : 215622

Marine Oil Separator System

Marine Oil Separator System
Product Detailed
Marine Oil Separator system Model PDSD6000 Capacity 6000L/h To remove water and mechanical impurities from fuel oil, etc.

Marine oil Separator System

Brief introduction

Model PDSD6000 separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.         

The machine adopts automatic control, and has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.    

The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.  

The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for long time with low vibration, safety and security. 

The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”. 

Auto Control  System

Water Control: Automatic control unlocking water, sealing water and water-seal/water switching.

Pneumatic Control: Filter and adjust compressed air, control heavy phase pneumatic valve and  three-way changeover pneumatic valve.

Temperature Control: Automatic control the temperature of the oil line, also control separately or withelectric control cabinet at the same time.

Buzzer Control: Monitor oil temperature, pressure, over loading, non-discharging and leaking, and Offer a group of passive contactor stretching out to control panel.

Main Technical Specification

  

Discharging type

Variable discharging

Max capacity

L/h

6000

Output pressure of clear oil

Mpa

≤0.2Mpa

Motor power

kW

7.5 (380V/50Hz/3P)

N.W.

kg

620

Dimension

L × W × H (mm)

1049 × 729 × 1090

The whole unit consists of:

1. Separator 

2. Oil feed pump

3. Electric control box

4. Steam heater

5. Temperature adjusting valve

6. Steam trap

7. Safety valve

8. Pressure switch

9. Oil filter

10. Pressure gauge

11. Vacuum gauge

12. Temperature sensor

13. 2/2 Solenoid valve                       

14. 2/3 Solenoid valve 

15. Air reduction pressure valve        

16. Pneumatic three-way valve          

17. Stop-check valve

18. Brass filter ball valve

19. Water pressure reducing valve

20. Ball valve

21. Skid 

More pictures

  

  

Condition for mineral oil separation and actual capacity (refer to the chart)

 

Oil types

Fuel oil

Lubrication oil

Fuel oil

Heavy fuel oil

SAE30, 40

Detergence oil

Steam turbine oil

Kinematical viscosity (mm²/s)

1.9-5.5

5.5-24

120

180

380

100-120

61.2-74.8

40°C

50°C

40°C

40°C

Density 

(kg/m³)(20°C)

< 900

900-991

880-900

< 900

Separating temperature (°C)

Normal temperature, 40-60 best

90-98

80-95

Recommended capacity (L/h)

6500

6000

4500

4000

3000

2000-3500

2000-3500

4000-5000

If you have special requirement, please connect with us.

 

Reserve the right to change specifications without prior notification. 

 

 

Marine Oil Separator System



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.